Blog

Analysis of the Delta Connection for Vacuum Pumps

Mar 11, 2026 Leave a message

Working Principle of the Delta Connection
The delta connection is akin to equipping a vacuum pump with a three-speed gearbox: the three-phase windings are connected end-to-end to form a closed loop, with each winding directly subjected to the line voltage. This configuration allows the windings to receive a higher operating voltage, making it particularly suitable for applications requiring substantial starting torque.

Voltage Characteristics: Winding Voltage = Line Voltage (e.g., 380V)

Current Characteristics: Line Current = 1.73 × Phase Current

Typical Applications: High-power motors (7.5 kW and above)

 

Scenarios Suitable for This Connection Method
The delta connection is the ideal choice for your vacuum pump under the following circumstances:

Difficult Starting: When high load inertia necessitates greater starting torque

Voltage Stability: Industrial environments characterized by relatively high and stable grid voltages

Continuous Operation: Operating conditions requiring sustained high-power output over extended periods

Energy Efficiency Optimization: To avoid the decline in efficiency under light loads often associated with the star connection

 

Key Operational Considerations
Utilizing this connection method is akin to driving a manual-transmission sports car-it requires special attention to the following points:

Winding Inspection: Ensure that the insulation resistance value exceeds 5 MΩ

Direction Verification: Manually rotate the shaft prior to powering up to verify the intended direction of rotation

Overload Protection: A suitable thermal overload relay must be installed

Thermal Management: Monitor winding temperatures during operation to ensure they do not exceed 80°C

Switching Safety: When using a Star-Delta starter, set the transition delay time between 2 and 5 seconds

Send Inquiry