Many users who have never used an oxygen concentrator often wonder: where exactly does the oxygen come from? In reality, an oxygen concentrator does not *create* oxygen from scratch; rather, it functions much like a filter, serving the specific purpose of separating and purifying the gas.
The raw material used by an oxygen concentrator to produce oxygen is-quite simply-the air around us. Ambient air is primarily composed of nitrogen (approximately 78% by volume) and oxygen (approximately 21% by volume), with the remaining fraction consisting of noble gases (0.934%), carbon dioxide (0.04%), and trace amounts of other substances (0.002%). As is evident, nitrogen and oxygen are by far the two most abundant gases in the air. The oxygen concentrator acts essentially as a sieve: it extracts the oxygen from the air-thereby increasing its concentration-while expelling all the remaining nitrogen out of the machine.
The core component of the oxygen concentrator is the compressor, which is responsible for compressing the air. A specific volume of compressed air yields a corresponding volume of oxygen. After passing through the compressor, the air flows into the next key component: the molecular sieve. The molecular sieve is the mechanism that separates the nitrogen from the oxygen within the air mixture. The extracted, purified oxygen then enters a storage and delivery system, flowing toward the machine's oxygen outlet, where a nasal cannula or oxygen tube can be attached for inhalation. The excess nitrogen is routed through a separate pathway and expelled outside the machine. The rhythmic "puffing" sound you often hear coming from the device is simply the sound of the oxygen concentrator venting this nitrogen. This process is quite straightforward and easy to understand; however, if you require further clarification, please refer to the diagram below.


