Air Dryer Cooler

Some factories have very hot air from the compressor. The outlet temperature can go above 80°C. A standard product may fail under this heat. That is why we made the NK-WG series. This is a water-cooled product for high temperature. It lowers the hot air quickly. Then the rest of the system works well. The NK-110WG handles 11 m³/min. The NK-850WG handles 85 m³/min. The NK-1600WG handles 160 m³/min. This air dryer cooler works for big production lines that run all day.

We have met this problem in cement and steel plants. The customer's old unit gave alarms often. After they switched to our product, the problem went away. The NK-110WG uses a G2-1/2" port. Its power is 1.5 kW. The NK-850WG uses a DN150 port and 11.5 kW. The NK-1600WG uses a DN200 port and 19 kW. The air dryer cooler needs water supply. Make sure you check the inlet air temperature first. Then pick the right model. This shows your customers that you are professional.

When you sell an product, you solve a real pain point. Customers with high heat are often desperate. They have tried other solutions. Your recommendation builds trust. This air dryer cooler also works for large air stations. It keeps the dew point stable under tough conditions. Offer it to any factory with a hot compressor outlet. You will close more deals.

Hot Tags: air dryer cooler, China air dryer cooler manufacturers, suppliers, factory